Ptil logo 2018 svart mobile ptil-logo-english-new

§ 12 Materials

Materials to be used in or on facilities shall be selected considering
  1. the load/action requirements mentioned in Section 11,
  2. manufacturing, joining and construction processes,
  3. possible use of materials protection,
  4. fire-resistance properties,
  5. probable changes in operating conditions,
  6. the opportunity to reduce future use of chemicals and pollution,
  7. the opportunity to reduce, reuse and recover waste,
  8. the employees' health and working environment,
  9. potential future removal.
Section last changed: 01 January 2011

In order to fulfil the requirement regarding materials and material protection as mentioned in literas a, b and c, the following standards should be used in the area of health, working environment and safety:
  1. NORSOK M-001 for material selection,
  2. NORSOK M-101 for steel structures,
  3. ISO 13623 Chapter 8 and DNVGL-ST-F101 Paragraphs 6 and 7 for pipeline systems,
  4. DNV-OS-F201 Paragraph 7 for catenary metallic risers,
  5. API 17J Chapter 6 for flexible pipeline systems,
  6. NORSOK N-001 for concrete structures,
  7. NORSOK M-501 for choice of coating, pre-processing, application and inspection,
  8. NORSOK M-503 for cathodic protection,
  9. NORSOK M-601 for piping systems,
  10. NORSOK M-004 for insulation of equipment.
For mobile facilities registered in a national ship register, the following standards can be used as an alternative in the area of health, working environment and safety: DNVGL-OS-B101 for metallic materials, DNVGL-OS-C102 Paragraph 2 Section 1 for ship-shaped facilities, DNVGL-OS-C103 Paragraph 2 Section 1 for semi-submersible facilities and DNVGL-OS-C104 Paragraph 2 Section 1 for jack-up facilities.
Methods for control of manufacture and assembly as mentioned in litera b, may include materials control where the sample materials represent the product with regard to manufacture processes, geometrical design and dimensions. Requirements regarding surface quality should be specified in connection with carrying out non-destructive testing of forged and cast goods.
When choosing materials as regards fire-resistance characteristics as mentioned in litera d, non-flammable materials should be chosen. Where flammable materials are used, they should limit the spread of fire and produce little smoke, heat and toxic substances. In living quarters, electrical installations should be constructed of halon-free materials. The flame spread and smoke development qualities of the materials should be considered when textiles or surface treatment with paint or other coating is used. The following standards should be used to determine the technical fire qualities of materials:
  1. ISO 1182 for non-flammability,
  2. ISO 1716 for limited flammability,
  3. ISO 5657 for ignitability,
  4. ISO 5660-1 for heat emission,
  5. ISO 5660-1 for smoke development,
  6. IMO Resolution A.653 (16) for spreading of flames,
  7. ISO 9705 for testing of surface products,
  8. NT Fire 036 for testing of pipeline insulation,
  9. IMO Resolution A.471 (XII) for textiles
  10. IEC 60331 for cables which shall function during a fire,
  11. IEC 60332 for self-extinguishing cables in areas with explosion hazard.
When choosing materials in light of the employees' health and working environment as mentioned in litera h, materials should be used which are not harmful to the employees alone or in combination with other materials or gases. When choosing materials and surfaces, emphasis should be placed on comprehensive solutions adapted to the intended use and cleaning and maintenance requirements.